At last, the left panel terminations are done, ready for the panel to be attached. Days of work to get here. This may look disorganized, but it ain't. There's actually a bundle for each switch or other connection. Everything has disconnects, whether Quick Tabs, DB-sub or Molex connectors. The prominent black connector at top center is for the EI SC-5 clock. The silver DB-9 connector just above that is the consolidated ground connections for all the low current left panel grounds -- LED's, etc. The white plastic Molex connector below those carries the starter wires. There's another DB-9 just above the big piece of blue tape in the middle, which is for the (6) A/P source select wires, alternator sense and stuck starter wires. The bunch of half a dozen wires hanging down below the panel are connections for annunciator LED's on center panel section. At the very bottom, the A/P roll servo cable is coiled & taped to the side wall.